English-first OBD-II diagnostics Static, fast, focused lookup pages
CD CheckDTC Garage-grade fault lookup
Browse codes Try AI Diagnose
Home / Codes / P0776
DTC code page

P0776: Pressure Control Solenoid B Performance or Stuck Off

Quick answer: The transmission did not see the pressure-control response it expected when solenoid B was commanded.

Drivers also search this fault as pressure control solenoid B performance, PCS B stuck off, line pressure solenoid B performance code.

Severity: high Family: powertrain Related paths: 9
Meaning

What P0776 usually means

P0776 is the performance version of the PCS B family. Instead of only flagging a broad malfunction, it suggests the transmission is not building or modulating pressure the way the controller expects from that specific pressure-control channel. That can show up as lazy engagement, flare on upshift, soft-then-harsh shift feel, or fail-safe operation after repeated bad applies. It is a strong adjacent page because it lands squarely in the same deep transmission branch the site already ranks on, while still covering distinct search intent.

Fast triage

Start here before chasing parts

  • Scan first: save freeze-frame and pending codes before clearing anything.
  • Confirm the complaint: compare the stored code with current drivability symptoms.
  • Use context: trims, live data, and related codes usually narrow the fault faster than guesswork.
  • Work simplest to hardest: leaks, connectors, maintenance items, and known patterns before expensive components.
Initial checks

What to check first

  • Determine whether the complaint gets worse hot, because warm fluid often exposes weak pressure control faster than a cold test.
  • Check for broad shift complaints rather than focusing on one gear only.
  • Review companion ratio and converter codes since pressure-control problems often create those as secondary fallout.
Driving risk

Can you keep driving?

P0776 can turn mild slipping and delayed engagement into real transmission damage if driving continues. Limit use if shifts are flaring, dragging, or repeatedly forcing fail-safe mode.

High urgency: If symptoms are active, reduce driving and diagnose quickly before secondary damage builds.
Likely causes

Common causes behind this code

  • Pressure-control solenoid B is slow, weak, or sticking off
  • Valve-body wear or leakage prevents pressure from following command
  • Fluid contamination or overheating reduces hydraulic control quality
  • Intermittent circuit weakness affects the solenoid under certain conditions
  • Internal pressure leak or clutch-apply problem makes commanded pressure look inadequate

Cause phrases often tied to this code: lazy pressure control solenoid B, valve body wear, line pressure leak, dirty transmission fluid, intermittent PCS problem.

Diagnostic order

Suggested workflow

  1. Review freeze-frame and transmission temperature when the code set.
  2. Compare commanded pressure behavior with actual shift feel and ratio data during a road test.
  3. Inspect the PCS B circuit and connector for intermittent electrical issues.
  4. If the command path is credible, widen the diagnosis to the valve body, internal leakage, and fluid condition.
  5. After repair, confirm consistent engagement and shift quality through a full warm drive cycle.
Avoid guesswork

Common mistakes

  • Replacing a shift solenoid because the symptom feels like one bad gear change when the real issue is broader pressure control.
  • Ignoring how much worse the complaint becomes after the transmission heats up.
  • Treating P0776 as purely electrical even though hydraulic leakage is a common cause.
Repair path

Practical fix guidance

  • Use P0776 to prove whether the problem is weak control, weak pressure response, or pressure loss downstream.
  • Correct fluid, electrical, and valve-body issues before concluding the unit has irreversible internal damage.
  • Verify the repair hot because performance-side pressure faults commonly pass a short cold test.
Vehicle context

Affected brands in this MVP

Brand hubs help broaden internal linking now and can evolve into make-specific diagnostic notes later.

Aliases and common searches

English phrases tied to P0776

Useful when the driver knows the wording but not the exact DTC yet.

  • pressure control solenoid B performance
  • PCS B stuck off
  • line pressure solenoid B performance code
Related search intent

Queries this page can answer naturally

  • P0776 code meaning
  • what does P0776 mean
  • pressure control solenoid B performance
  • PCS B stuck off symptoms
FAQ

Quick questions about P0776

What is the difference between P0775 and P0776?

P0775 is the broader pressure-control-solenoid B malfunction code, while P0776 leans more toward poor performance or a stuck-off response.

Can a worn valve body cause P0776?

Yes. Valve-body wear and hydraulic leakage are common reasons the pressure response does not follow command.

Does P0776 always mean low fluid?

No. Low fluid is one cause, but solenoid weakness, valve-body wear, and internal pressure leaks can also trigger it.