English-first OBD-II diagnostics Static, fast, focused lookup pages
CD CheckDTC Garage-grade fault lookup
Browse codes Try AI Diagnose
Home / Codes / P0757
DTC code page

P0757: Shift Solenoid B Stuck On

Quick answer: The controller believes shift solenoid B is remaining applied when it should switch off.

Drivers also search this fault as shift solenoid B stuck on, P0757 stuck on code, transmission solenoid B stays applied.

Severity: high Family: powertrain Related paths: 10
Meaning

What P0757 usually means

P0757 narrows the B-side diagnosis further by pointing to a stuck-on condition. That matters because stuck-on and stuck-off complaints often feel different behind the wheel. Instead of simply missing an upshift, the transmission may hold a gear, overlap shifts, or command a ratio the hydraulics do not properly release from. Like other stuck-on transmission codes, P0757 can be electrical or hydraulic, so the smartest diagnostic path is to compare command state to actual shift behavior instead of guessing from the code name alone.

Fast triage

Start here before chasing parts

  • Scan first: save freeze-frame and pending codes before clearing anything.
  • Confirm the complaint: compare the stored code with current drivability symptoms.
  • Use context: trims, live data, and related codes usually narrow the fault faster than guesswork.
  • Work simplest to hardest: leaks, connectors, maintenance items, and known patterns before expensive components.
Initial checks

What to check first

  • Verify whether the transmission is holding one gear too long or overlapping shifts instead of simply missing them.
  • Check if the complaint appears after warmup because sticky valves often become more obvious hot.
  • Look for related ratio and electrical codes before deciding whether the problem is purely hydraulic.
Driving risk

Can you keep driving?

P0757 can create harsh overlap, wrong-gear operation, and excess transmission heat. Driving should be minimized if the gearbox is hanging onto gears or entering limp mode.

High urgency: If symptoms are active, reduce driving and diagnose quickly before secondary damage builds.
Likely causes

Common causes behind this code

  • Shift solenoid B mechanically stuck in the applied position
  • Control-circuit short keeping the solenoid energized
  • Valve-body sticking that prevents hydraulic release
  • Contaminated fluid or debris causing spool hang-up
  • Internal transmission condition that makes the controller interpret the B path as stuck on

Cause phrases often tied to this code: shift solenoid B stuck on, short to power on B solenoid, dirty fluid sticking valve body, B solenoid won’t release, P0757 hydraulic issue.

Diagnostic order

Suggested workflow

  1. Capture freeze-frame and identify the gear event associated with the code.
  2. Compare commanded solenoid state to actual ratio and shift timing on scan data.
  3. Test the B circuit for shorts, unwanted voltage, or driver faults.
  4. If the command state looks correct, inspect valve-body behavior and fluid condition for sticking release problems.
  5. After repair, confirm the transmission no longer holds or overlaps the affected shift when hot.
Avoid guesswork

Common mistakes

  • Calling every P0757 a bad TCM without proving the hydraulic side.
  • Ignoring debris or fluid condition that can lock a valve in the applied state.
  • Returning the vehicle after a short cold test when the complaint is heat dependent.
Repair path

Practical fix guidance

  • P0757 should be diagnosed by comparing commanded release to actual release, not by replacing parts blindly.
  • Electrical control and valve-body movement both need to be proven because either can create a stuck-on interpretation.
  • Do the final verification hot and through repeated shifts if that is how the failure originally appeared.
Vehicle context

Affected brands in this MVP

Brand hubs help broaden internal linking now and can evolve into make-specific diagnostic notes later.

Aliases and common searches

English phrases tied to P0757

Useful when the driver knows the wording but not the exact DTC yet.

  • shift solenoid B stuck on
  • P0757 stuck on code
  • transmission solenoid B stays applied
Related search intent

Queries this page can answer naturally

  • P0757 code meaning
  • what does P0757 mean
  • shift solenoid B stuck on symptoms
  • P0757 transmission fault
FAQ

Quick questions about P0757

What does stuck on mean for P0757?

It means the controller believes the B solenoid or the hydraulic state tied to it is staying applied when it should release.

Can a short to power trigger P0757?

Yes. If the solenoid is kept energized electrically, the controller may read it as stuck on.

Does P0757 always require transmission replacement?

No. Solenoid, wiring, valve-body, and fluid issues are all common possibilities.